อยากรู้การทำงานของชิปจับเวลาในการแข่งขัน
ผู้ดูแล: Cycling B®y, spinbike, velocity
- อ๊อด โคกทราย
- ขาประจำ
- โพสต์: 313
- ลงทะเบียนเมื่อ: 07 ม.ค. 2015, 19:34
- Tel: 0840535700
- team: ขาแรงทุ่งสง
- Bike: จามิส
- ติดต่อ:
อยากรู้การทำงานของชิปจับเวลาในการแข่งขัน
ในสนามแข่งจักรยานหลายๆสนามใช้ชิปช่วยในการจับเวลาและแสดงตำแหน่งแต่บางสนามก็ไม่ใช้ใช้กรรมการดูตำแหน่งโดยใช้กล้องวิดิโอมาช่วยโดยสังเกตุจากการเก็บค่าสมัครสนามใช้ชิปจะเก็บค่าสมัครประมาณ 600 บาทขึ้นไปส่วนสนามไม่ใช้ชิปจะเก็บประมาณ 500 บาทแต่ในความรู้สึกของนักจักรยานที่เข้าร่วมแข่งขันอยากให้ใช้ชิพมากกว่าถึงแม้ค่าสมัครจะเพิ่มขึ้นอีกเล็กน้อยผมเลยอยากรู้ครับว่าการทำงานของชิปมันทำงานอย่างไรและการเก็บค่าใช้จ่ายของบริษัทชิปที่ให้บรืการเขาคิดค่าใช้จ่ายอย่างไร
- lucifer
- ขาประจำ
- โพสต์: 6413
- ลงทะเบียนเมื่อ: 28 ก.ย. 2010, 14:53
- team: BPMTB , BPRB , Bikeloves
- Bike: Only 2-wheels bike
- ติดต่อ:
Re: อยากรู้การทำงานของชิปจับเวลาในการแข่งขัน
ชิฟ หรือ chip จับเวลา มันคือ RFID tag ซึ่งแต่ละชิ้นจะมี ID ของมันเอง
RFID (radio frequency identification)
RFID (radio frequency identification) is a form of wireless communication that incorporates the use of electromagnetic or electrostatic coupling in the radio frequency portion of the electromagnetic spectrum to uniquely identify an object, animal or person.
An RFID system consists of three components: a scanning antenna and transceiver (often combined into one reader, also known as an interrogator) and a transponder, the RFID tag. An RFID tag consists of a microchip, memory and antenna.
The RFID reader is a network-connected device that can be permanently attached or portable. It uses radio frequency waves to transmit signals that activate the tag. Once activated, the tag sends a wave back to the antenna, where it is translated into data.
แปลเองนะครับ
ข้อดีคือ ไม่ต้องมโนว่าเวลาจริงเท่าไหร่ พอมันผ่านเสาอากาศ มันก็ส่งสัญญาณบอกให้ระบบรู้ว่า tag ID นี้ผ่านจุดนี้เมื่อเวลาเท่าไหร่ แล้วไปสร้างสมการคำนวณว่า เวลาแต่ละช่วงเท่าไหร่ เวลารวมเท่าไหร่ โกงยากหน่อย
ประหยัดคน ประหยัดแรงงาน แค่วางเครือข่ายให้ดี ขอให้มัน link กับตัวสถานีเครือข่ายได้ก็จบแล้ว
RFID (radio frequency identification)
RFID (radio frequency identification) is a form of wireless communication that incorporates the use of electromagnetic or electrostatic coupling in the radio frequency portion of the electromagnetic spectrum to uniquely identify an object, animal or person.
An RFID system consists of three components: a scanning antenna and transceiver (often combined into one reader, also known as an interrogator) and a transponder, the RFID tag. An RFID tag consists of a microchip, memory and antenna.
The RFID reader is a network-connected device that can be permanently attached or portable. It uses radio frequency waves to transmit signals that activate the tag. Once activated, the tag sends a wave back to the antenna, where it is translated into data.
แปลเองนะครับ
ข้อดีคือ ไม่ต้องมโนว่าเวลาจริงเท่าไหร่ พอมันผ่านเสาอากาศ มันก็ส่งสัญญาณบอกให้ระบบรู้ว่า tag ID นี้ผ่านจุดนี้เมื่อเวลาเท่าไหร่ แล้วไปสร้างสมการคำนวณว่า เวลาแต่ละช่วงเท่าไหร่ เวลารวมเท่าไหร่ โกงยากหน่อย
ประหยัดคน ประหยัดแรงงาน แค่วางเครือข่ายให้ดี ขอให้มัน link กับตัวสถานีเครือข่ายได้ก็จบแล้ว
ถ้าอ่อนซ้อม อ่อนทักษะ ก็จะพบว่าจักรยานคันไหนๆก็ไม่แตกต่างกันหรอก เพราะปั่นไม่ไปเหมือนๆกัน และบังคับควบคุมได้ห่วยพอๆกัน
- lucifer
- ขาประจำ
- โพสต์: 6413
- ลงทะเบียนเมื่อ: 28 ก.ย. 2010, 14:53
- team: BPMTB , BPRB , Bikeloves
- Bike: Only 2-wheels bike
- ติดต่อ:
Re: อยากรู้การทำงานของชิปจับเวลาในการแข่งขัน
การเซท chip อาจจะนับเวลาจริงคือ เวลาที่ผ่านเส้นสตาร์ท กับ เวลาที่เข้าเส้นฟินนิช ซึ่งก็มักถกเถียงกันว่า แกออกทีหลังชั้น ชั้นเข้าก่อนแก ทำไมอันดับแกดีกว่าชั้น อันนี้ก็เป็นแบบหนึ่ง
แต่ถ้าตัดปัญหาทั้งตัวเลขและความรู้สึก ก็เซทให้เวลาเริ่มเดินตั้งแต่สตาร์ท โดยไม่สนว่าผ่านเส้นสตาร์ทกี่โมง แบบนี้ก็จะให้ความรู้สึกว่า ถ้าอยากจะได้อันดับก็ต้องเบียดมาชิงตำแหน่งสตาร์ทกันหน้าเส้น
แต่ถ้าตัดปัญหาทั้งตัวเลขและความรู้สึก ก็เซทให้เวลาเริ่มเดินตั้งแต่สตาร์ท โดยไม่สนว่าผ่านเส้นสตาร์ทกี่โมง แบบนี้ก็จะให้ความรู้สึกว่า ถ้าอยากจะได้อันดับก็ต้องเบียดมาชิงตำแหน่งสตาร์ทกันหน้าเส้น
ถ้าอ่อนซ้อม อ่อนทักษะ ก็จะพบว่าจักรยานคันไหนๆก็ไม่แตกต่างกันหรอก เพราะปั่นไม่ไปเหมือนๆกัน และบังคับควบคุมได้ห่วยพอๆกัน
- อ๊อด โคกทราย
- ขาประจำ
- โพสต์: 313
- ลงทะเบียนเมื่อ: 07 ม.ค. 2015, 19:34
- Tel: 0840535700
- team: ขาแรงทุ่งสง
- Bike: จามิส
- ติดต่อ:
Re: อยากรู้การทำงานของชิปจับเวลาในการแข่งขัน
ขอบคุณครับ
- อ๊อด โคกทราย
- ขาประจำ
- โพสต์: 313
- ลงทะเบียนเมื่อ: 07 ม.ค. 2015, 19:34
- Tel: 0840535700
- team: ขาแรงทุ่งสง
- Bike: จามิส
- ติดต่อ:
Re: อยากรู้การทำงานของชิปจับเวลาในการแข่งขัน
ขอบคุณครับlucifer เขียน:ชิฟ หรือ chip จับเวลา มันคือ RFID tag ซึ่งแต่ละชิ้นจะมี ID ของมันเอง
RFID (radio frequency identification)
RFID (radio frequency identification) is a form of wireless communication that incorporates the use of electromagnetic or electrostatic coupling in the radio frequency portion of the electromagnetic spectrum to uniquely identify an object, animal or person.
An RFID system consists of three components: a scanning antenna and transceiver (often combined into one reader, also known as an interrogator) and a transponder, the RFID tag. An RFID tag consists of a microchip, memory and antenna.
The RFID reader is a network-connected device that can be permanently attached or portable. It uses radio frequency waves to transmit signals that activate the tag. Once activated, the tag sends a wave back to the antenna, where it is translated into data.
แปลเองนะครับ
ข้อดีคือ ไม่ต้องมโนว่าเวลาจริงเท่าไหร่ พอมันผ่านเสาอากาศ มันก็ส่งสัญญาณบอกให้ระบบรู้ว่า tag ID นี้ผ่านจุดนี้เมื่อเวลาเท่าไหร่ แล้วไปสร้างสมการคำนวณว่า เวลาแต่ละช่วงเท่าไหร่ เวลารวมเท่าไหร่ โกงยากหน่อย
ประหยัดคน ประหยัดแรงงาน แค่วางเครือข่ายให้ดี ขอให้มัน link กับตัวสถานีเครือข่ายได้ก็จบแล้ว