ตั้งรับ RoadLink ของ Wolf tooth

ประกาศแจ้งความต้องการซื้อของท่านที่นี่ เพื่อการพบกันได้ง่ายขึ้นสำหรับผู้มีของเหลือใช้ แต่ยังไม่ได้ประกาศขาย
ตอบกลับ
รูปประจำตัวสมาชิก
chai234
ขาประจำ
ขาประจำ
โพสต์: 200
ลงทะเบียนเมื่อ: 11 ส.ค. 2008, 10:59
team: Bungsamphan / เพชรบูรณ์
Bike: Trek 8500 '08, BMC SLR02 '14, HONGFU FM066SL

ตั้งรับ RoadLink ของ Wolf tooth

โพสต์ โดย chai234 »

ตั้งรับ RoadLink ของ Wolf tooth
มือสอง สภาพดี ราคามิตรภาพ
หรือของใหม่ เสนอราคามาครับ
lulu
ขาประจำ
ขาประจำ
โพสต์: 451
ลงทะเบียนเมื่อ: 11 ส.ค. 2008, 13:46
Tel: LINE ID : l.o.r.d_bikerack
Bike: L.O.R.D Bike Rack
ติดต่อ:

Re: ตั้งรับ RoadLink ของ Wolf tooth

โพสต์ โดย lulu »

มีของใหม่เดี๋ยวพรุ่งนี้ถ่ายรูปให้ดูครับ

Line : l.o.r.d_bikerack
L.O.R.D. รับผลิตแร็คจักรยานติดตั้งบนรถยนต์ และอาคารสถานที่ ตามแบบที่คุณต้องการ สนใจติดต่อ 080-2442-482 ครับ
http://www.facebook.com/LordBikeRack?ref=hl
LINE : lordbikerack
m-bike
ขาประจำ
ขาประจำ
โพสต์: 12559
ลงทะเบียนเมื่อ: 04 ส.ค. 2008, 09:13
Tel: 089-1431355

Re: ตั้งรับ RoadLink ของ Wolf tooth

โพสต์ โดย m-bike »

ตัวต่อตีนผี/drop out "RoadLink" โดย Wolf Tooth Components ออกแบบและผลิตในUSA

www.thaimtb.com/forum/viewtopic.php?f=28&t=1502901

===========================================================

ตัวต่อตีนผี/drop out "RoadLink" โดย Wolf Tooth Components ออกแบบและผลิตในUSA ยื่นจดสิทธิบัตรเรียบร้อยแล้วน่ะครับ อยู่ระหว่างรอรับสิทธิบัตร (patent pending) ซึ่งได้รับความคุ้มครองตามกฎหมาย
ราคาตัวละ 850 บาท พร้อมส่ง



The RoadLink derailleur hanger extension is a unique patent-pending device that offsets the position of your road derailleur to make it possible to run a wide-range mountain bike style cassette. It is an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter drivetrain bike to attain the simplicity and reduced weight of a single front chainring...and without giving up the gear range of a double. It is also great for riders with double chainring bikes that want lower gearing for those ultra steep climbs.

For more Technical details on the RoadLink, checkout the RoadLink Tech Page.

The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes and works great with Wolf Tooth’s 40-tooth GC cassette extenders and Drop-Stop chainrings. The Roadlink RD adaper installs in minutes, is optimized around Shimano ten- or eleven-speed road derailleurs and shifters, but works well with SRAM and Campy too. It can be used with single or double chainrings. Here is a list of recommended applications:
•Single Chainring:
•Road
•Cyclocross
•Commuting
•Drop-bar mountain
•Double Chainring:
•Road
•Touring
•Drop-bar mountain

Compatibility:
•10s Cassette Compatibility:
•11-32: Not Required (GS medium cage rear derailleur works)
•11-34: Single or Double Chainring
•11-36: Single or Double Chainring
•11-40: Single or Double Chainring (front rings can be no more than 14 teeth different e.g. 48-34)
•11-42: Not Supported
•11s Cassette Compatibility:
•11-32: Not Required (GS medium cage rear derailleur works)
•11-36: Single or Double Chainring
•11-40: Single or Double Chainring (front rings can be no more than 14 teeth different e.g. 48-34)
•11-42: Not Supported
•10-42: Not Supported
•The RoadLink mounts only to standard derailleur hangers.

•The RoadLink is optimized for the 10 and 11 speed Shimano road derailleur geometry. It also works very well with 9 speed road groups, all SRAM groups, and Campy derailleurs! One note is that with Campy it works best with cassettes on up to 11-36.

• SRAMs Exact Actuation road shifters (10s and 11s) are interchangeable with their Exact Actuation mountain derailleurs- which can easily handle a 36 or 40 (and, for one-by, are available with a clutch)- and the CX1 will go even bigger with a single 'ring. If you already have SRAM, they also make nice front brake-only levers that match their rear shifters too.
• Double chainrings are only supported with GS (medium cage) rear derailleurs
• Triple chainrings are not supported (medium cage rear derailleurs cannot accommodate that big of a change)
• Direct Mount-native frames are not supported.
•Due to the lack of a clutch mechanism on Shimano road derailleurs, secondary chain retention (front derailleur or chain device) may be needed, especially for rough- or off-road use.
•Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment, and suspension configuration, individual results will vary.
•This 7.9mm max dimension is controlled by the Shimano spec, but a few derailleur hangers don't meet the spec. You can file a bit of the bottom "tang" of those derailleur hangers to install the RoadLink


Complementing products:

Checkout our full line of Drop Stop chainrings for your 1x conversion. Most applications will use our 110 BCD, 130 BCD, 104 BCD, or direct mount CX/Road rings (for Cannondale or SRAM)

If you are looking to expand beyond the 11-36 range of a typical 10 speed mountain bike cassette, check out our GC40 and 16t cog.

Tech Specs:
•Patent pending design
•Manufactured in USA
•Material - 6061 aluminum
•Includes stainless steel bolt
•Installation Instructions - http://www.wolftoothcomponents.com/page ... structions
•See the RoadLink Tech Page for more details
•Colors - black
•Weight - 17g
ไฟล์แนบ
WT-RoadLink_with_bolt_1024x1024.jpg
WT-RoadLink_with_bolt_1024x1024.jpg (88.58 KiB) เข้าดูแล้ว 290 ครั้ง
ตอบกลับ

กลับไปยัง “แจ้งต้องการซื้อ”